GN214.2 Locking Pin, with Axial Lock
These pins with axial lock, GN 214.2, are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be frequently removed and re-placed again.
The two locking pawls can be retracted by pressing the button and on releasing it the pawls will be locked again.
The rectangular shape of the stainless steel locking pawls creates a linear contact area with axial lock of the pin.
The version with swivelling lifting ring is ideal for use in confined spaces.
The load values given in the attached table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and we accept no liability. They do not constitute general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.
Plunger - Steel ST, zinc plated, blue passivated.
Pawl - Stainless Steel sheet metal NI, AISI 304
Lifting ring - Stainless Steel NI, AISI 301
Push button/Slide - Plastic, temperature resistant up to 80° C, push button red
Spring - Stainless Steel NI, AISI 301
Ball chains GN111
Stainless steel ball chains GN111.5
Retaining cables GN111.2
Spiral retaining cables GN111.4