Type A - Upper seal profile
Type D - Side seal profile
GN2182 Edge Protection Seal Profiles
GN 2182 edge protection seal profiles can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded clamp insert prevents detachment. Glue or other adhesives are not required.
They are installed on the edges of metal sheets and plates, to protect surfaces from damage caused by sharp edges. The edge finish additionally produces a decorative effect, while the need for potential further treatment such as burring and chamfering of cut or laser-cut metal sheets is reduced to an absolute minimum, cutting costs.
When assembled, the profile should deform slightly according to w2. This ensures an optimal seal. Adherance to the guideline placement radii (r1... r4) is recommended in order to ensure a tight profile seal and to make assembly easier.
Clamping profile - Polyvinyl chloride (PVC), Hardness 70±5 Shore A
Sealing profile - Ethylene propylene diene rubber (EPDM), Hardness 25±5 Shore A
Clamp insert - Steel ST, clamping band, black, temperature resistant -40 °C to 90 °C, weather resistant.