DIN580 Lifting Eye Bolt, Steel Zinc Plated, Drop Forged, Male
These lifting eye bolts are strong and robust, and correspond to standard sheet DIN 580 (version 2003-08).
The following guidelines have to be observed in addition to the load values given in the attached pdf table.
The eye bolt must be fully screwed in to achieve a perfect contact between the two mating faces.
Both threads must be of an equal length and the base material of equal strength to that of the bolt.
With a side pulling angle of > 45°, lifting eye bolts must not be used.
Steel ST, drop forged, annealed. Contact face machined, zinc plated, blue passivated.